Other modems setup parameters Office Offers: Office Plus Special, Office Plus, Office Maxi
After the final testing of the service on your premises, you can choose to use your own modem. Remember to check if your modem is compatible with the chosen offer profile (VDSL, VDSL2, VDSL2-VPlus for FTTC and ADSL, ADSL2 and ADSL2 + for ADSL). In case of FTTH check that the modem has the SFP slot.Below are the general parameters required for configuration.
To complete the configuration, you will need to request the additional parameters specific to your user from 1928 customer service.
To complete the configuration, you will need to request the additional parameters specific to your user from 1928 customer service.
Choose your modem technology:
- FTTH Parameters
- FTTC Parameters
- FWA Parameters
- BS ADSL Parameters
- ULL ADSL Parameters
- VoIP Parameters
The network architecture requires an SFP module for the FIBER connection usage, provided free of charge. The SFP model compatible with our network is the HUAWEI MA5671A modem, firmware V800R017C00SPH201 and ZYXEL PMG3000 in case of GPON 2,5. Upon choosing the modem you have to verify the presence of an SFP slot for the proper housing of it. Receive more info through our selling channels by calling 159.
Fields to fill in | Parameters to insert |
---|---|
Vlan | 835 |
Protocol | PPPoE |
PPPoE usr | USER univoca per cliente |
PPPoE pwd | USER univoca per cliente |
Encapsulation | LLC |
MTU | 1492 |
Keep Alive | on |
NAT | enabled |
IGMP | enabled |
COS data | 1 (IEEE 802.1 P) |
COS voice | 5 (IEEE 802.1 P) |
Fields to fill in | Parameters to insert |
---|---|
Vlan | 835 |
Protocol | PPPoE |
PPPoE usr | USER univoca per cliente |
PPPoE pwd | USER univoca per cliente |
Encapsulation | LLC |
MTU | 1492 |
Keep Alive | on |
NAT | enabled |
IGMP | enabled |
COS data | 1 (IEEE 802.1 P) |
COS voice | 5 (IEEE 802.1 P) |
Fields to fill in | Parameters to insert |
---|---|
VLan data | 10 |
VLan voice | 20 |
IP data protocol | IPoE (DHCP) |
IP voice protocol | IPoE (DHCP) |
NAT | enabled |
Fields to fill in | Parameters to insert |
---|---|
VPI | 8 |
VCI | 35 |
Protocol | PPPoE |
PPPoE usr | USER univoca per cliente |
PPPoE pwd | USER univoca per cliente |
Encapsulation | LLC |
LTU | 1492 |
Keep Alive | on |
NAT | enabled |
IGMP | enabled |
Fields to fill in | Parameters to insert |
---|---|
VPI | 8 (data) |
VCI | 40 (data) |
Protocol | PPPoE |
PPPoE usr | USER univoca per cliente |
PPPoE pwd | USER univoca per cliente |
Encapsulation | LLC |
LTU | 1492 |
Keep Alive | on |
NAT | enabled |
IGMP | enabled |
Fields to fill in | Parameters to insert |
---|---|
VPI | 8 (voice) |
VCI | 36 (voice) |
Protocol | IPoE (DHCP) |
Encapsulation | LLC |
LTU | 1500 |
Keep Alive | on |
Fields to fill in | Parameters to insert |
---|---|
SIP Proxy | voip.libero.it |
SIP Domain | wind.it |
Proxy Server port | 5060 |
SIP Expire time | 3600 |
Codec | G.729, G.711 A-law |
Codec FAX | G.711 A-law |
Packetization time | 20ms |
Toni DTMF | RFC 2833 / RFC 4733 |
DSCP Marking | 46 |
VAD | disabled |